snom 300 the new IP Phone Hardware-Oasis.com VoIP Shop / Store

VoIP Phone Forum / Board

VoIPphones.de - Das deutschrachige VoIP Portal
                 Other Settings:
                 + ST2030 VoIPconfig

Other Linksys VoIPconfig:
VoipBuster.com / SIPDiscount.com / VoipStunt.com / Sipgate.de


Copyright © 2001 Hardware-Oasis.com  |  Firmware Version: 3.1.8(LS)   

Voice


PAP2 Special
VoIP Monitoring
(Language German)

Click Here [x]


Phone Adapter with 2 Ports for Voice-Over-IP    

PAP2

 
Advanced View (switch to basic view) User Login    
System Information     Factory Default / Hardware Reset:
  Press the star key four times (* * * *) to enter the Linksys Configuration Menu and then the Code (73738 #1).

DHCP: Enabled Current IP: 192.168.0.112
Host Name: LinksysPAP Domain:  
Current Netmask: 255.255.255.0 Current Gateway: 192.168.0.1
Primary DNS: 194.97.173.124
Secondary DNS: 194.97.173.125
Product Information    
Product Name: PAP2-NA / PAP2-EU Serial Number: FH900E414414
Software Version: 3.1.8(LS) Hardware Version: 0.03.4
MAC Address: 001217FCDF70 Client Certificate: Installed
System Status    
Current Time: Elapsed Time: 00:46:35
Broadcast Pkts Sent: 0 Broadcast Bytes Sent: 0
Broadcast Pkts Recv: 256 Broadcast Bytes Recv: 26695
Broadcast Pkts Dropped: 0 Broadcast Bytes Dropped: 0
RTP Packets Sent: 0 RTP Bytes Sent: 0
RTP Packets Recv: 0 RTP Bytes Recv: 0
SIP Messages Sent: 187 SIP Bytes Sent: 68703
SIP Messages Recv: 189 SIP Bytes Recv: 76357
External IP: 194.97.123.153
Line 1 Status
InternetCalls.com
   
Display Name: Your Name User ID: Login Name
Hook State: On Registration State: Online
Last Registration At: Next Registration In: 775 s
Message Waiting: No Call Back Active: No
Last Called Number:   Last Caller Number:  
Mapped SIP Port:    
Call 1 State: Idle Call 2 State: Idle
Call 1 Tone: None Call 2 Tone: None
Call 1 Encoder:   Call 2 Encoder:  
Call 1 Decoder:   Call 2 Decoder:  
Call 1 FAX:   Call 2 FAX:  
Call 1 Type:   Call 2 Type:  
Call 1 Remote Hold:   Call 2 Remote Hold:  
Call 1 Callback:   Call 2 Callback:  
Call 1 Peer Name:   Call 2 Peer Name:  
Call 1 Peer Phone:   Call 2 Peer Phone:  
Call 1 Duration:   Call 2 Duration:  
Call 1 Packets Sent:   Call 2 Packets Sent:  
Call 1 Packets Recv:   Call 2 Packets Recv:  
Call 1 Bytes Sent:   Call 2 Bytes Sent:  
Call 1 Bytes Recv:   Call 2 Bytes Recv:  
Call 1 Decode Latency:   Call 2 Decode Latency:  
Call 1 Jitter:   Call 2 Jitter:  
Call 1 Round Trip Delay:   Call 2 Round Trip Delay:  
Call 1 Packets Lost:   Call 2 Packets Lost:  
Call 1 Packet Error:   Call 2 Packet Error:  
Call 1 Mapped RTP Port:   Call 2 Mapped RTP Port:  
Line 2 Status
SparVoIP.de
   
Display Name:   User ID: Username
Hook State: On Registration State: Online
Last Registration At: Next Registration In: 776 s
Message Waiting: No Call Back Active: No
Last Called Number:   Last Caller Number:  
Mapped SIP Port:    
Call 1 State: Idle Call 2 State: Idle
Call 1 Tone: None Call 2 Tone: None
Call 1 Encoder:   Call 2 Encoder:  
Call 1 Decoder:   Call 2 Decoder:  
Call 1 FAX:   Call 2 FAX:  
Call 1 Type:   Call 2 Type:  
Call 1 Remote Hold:   Call 2 Remote Hold:  
Call 1 Callback:   Call 2 Callback:  
Call 1 Peer Name:   Call 2 Peer Name:  
Call 1 Peer Phone:   Call 2 Peer Phone:  
Call 1 Duration:   Call 2 Duration:  
Call 1 Packets Sent:   Call 2 Packets Sent:  
Call 1 Packets Recv:   Call 2 Packets Recv:  
Call 1 Bytes Sent:   Call 2 Bytes Sent:  
Call 1 Bytes Recv:   Call 2 Bytes Recv:  
Call 1 Decode Latency:   Call 2 Decode Latency:  
Call 1 Jitter:   Call 2 Jitter:  
Call 1 Round Trip Delay:   Call 2 Round Trip Delay:  
Call 1 Packets Lost:   Call 2 Packets Lost:  
Call 1 Packet Error:   Call 2 Packet Error:  
Call 1 Mapped RTP Port:   Call 2 Mapped RTP Port:  
Line 3 Status
SIECT2.pl
   
Display Name:   User ID: Username
Hook State: On Registration State: Online
Last Registration At: Next Registration In: 777 s
Message Waiting: No Call Back Active: No
Last Called Number:   Last Caller Number:  
Mapped SIP Port:    
Call 1 State: Idle Call 2 State: Idle
Call 1 Tone: None Call 2 Tone: None
Call 1 Encoder:   Call 2 Encoder:  
Call 1 Decoder:   Call 2 Decoder:  
Call 1 FAX:   Call 2 FAX:  
Call 1 Type:   Call 2 Type:  
Call 1 Remote Hold:   Call 2 Remote Hold:  
Cal 1 Callback:   Call 2 Callback:  
Call 1 Peer Name:   Call 2 Peer Name:  
Call 1 Peer Phone:   Call 2 Peer Phone:  
Call 1 Duration:   Call 2 Duration:  
Call 1 Packets Sent:   Call 2 Packets Sent:  
Call 1 Packets Recv:   Call 2 Packets Recv:  
Call 1 Bytes Sent:   Call 2 Bytes Sent:  
Call 1 Bytes Recv:   Call 2 Bytes Recv:  
Call 1 Decode Latency:   Call 2 Decode Latency:  
Call 1 Jitter:   Call 2 Jitter:  
Call 1 Round Trip Delay:   Call 2 Round Trip Delay:  
Call 1 Packets Lost:   Call 2 Packets Lost:  
Call 1 Packet Error:   Call 2 Packet Error:  
Call 1 Mapped RTP Port:   Call 2 Mapped RTP Port:  
Line 4 Status
Skypho.net
   
Display Name:   User ID: 0662293707
Hook State: On Registration State: Online
Last Registration At: Next Registration In: 778 s
Message Waiting: No Call Back Active: No
Last Called Number:   Last Caller Number:  
Mapped SIP Port:    
Call 1 State: Idle Call 2 State: Idle
Call 1 Tone: None Call 2 Tone: None
Call 1 Type:   Call 2 Type:  
Call 1 Encoder:   Call 2 Encoder:  
Call 1 Decoder:   Call 2 Decoder:  
Call 1 FAX:   Call 2 FAX:  
Call 1 Remote Hold:   Call 2 Remote Hold:  
Call 1 Callback:   Call 2 Callback:  
Call 1 Peer Name:   Call 2 Peer Name:  
Call 1 Peer Phone:   Call 2 Peer Phone:  
Call 1 Duration:   Call 2 Duration:  
Call 1 Packets Sent:   Call 2 Packets Sent:  
Call 1 Packets Recv:   Call 2 Packets Recv:  
Call 1 Bytes Sent:   Call 2 Bytes Sent:  
Call 1 Bytes Recv:   Call 2 Bytes Recv:  
Call 1 Decode Latency:   Call 2 Decode Latency:  
Call 1 Jitter:   Call 2 Jitter:  
Call 1 Round Trip Delay:   Call 2 Round Trip Delay:  
Call 1 Packets Lost:   Call 2 Packets Lost:  
Call 1 Packet Error:   Call 2 Packet Error:  
Call 1 Mapped RTP Port:   Call 2 Mapped RTP Port:  
 
System Configuration    
Restricted Access Domains:
Enable Web Server: Web Server Port:
Enable Web Admin Access: Admin Passwd:
User Password:
Internet Connection Type    
DHCP:
Static IP: NetMask:
Gateway:
Optional Network Configuration    
HostName: Domain:
Primary DNS: Secondary DNS:
DNS Server Order: DNS Query Mode:
Syslog Server: Debug Server:
Debug Level: Primary NTP Server:
Zeitserver (at.pool.ntp.org)
Secondary NTP Server:
Alternativ Zeitserver
 
SIP Parameters    
Max Forward: Max Redirection:
Max Auth: SIP User Agent Name:
SIP Server Name: SIP Accept Language:
DTMF Relay MIME Type: Hook Flash MIME Type:
Remove Last Reg: Use Compact Header:
SIP Timer Values (sec)    
SIP T1: SIP T2:
SIP T4: SIP Timer B:
SIP Timer F: SIP Timer H:
SIP Timer D: SIP Timer J:
INVITE Expires: ReINVITE Expires:
Reg Min Expires: Reg Max Expires:
Reg Retry Intvl:
kurzer Registrierungsintervall
Reg Retry Long Intvl:
langer Registrierungsintervall
Response Status Code Handling    
SIT1 RSC: SIT2 RSC:
SIT3 RSC: SIT4 RSC:
Try Backup RSC: Retry Reg RSC:
RTP Parameters    
RTP Port Min: RTP Port Max:
RTP Packet Size: Max RTP ICMP Err:
RTCP Tx Interval:
SDP Payload Types    
NSE Dynamic Payload: AVT Dynamic Payload:
INFOREQ Dynamic Payload: G726r16 Dynamic Payload:
G726r24 Dynamic Payload: G726r40 Dynamic Payload:
G729b Dynamic Payload: NSE Codec Name:
AVT Codec Name: G711u Codec Name:
G711a Codec Name: G726r16 Codec Name:
G726r24 Codec Name: G726r32 Codec Name:
G726r40 Codec Name: G729a Codec Name:
G729b Codec Name: G723 Codec Name:
NAT Support Parameters    
Handle VIA received: Handle VIA rport:
Insert VIA received: Insert VIA rport:
Substitute VIA Addr: Send Resp To Src Port:
STUN Enable: STUN Test Enable:
STUN Server: EXT IP:
EXT RTP Port Min: NAT Keep Alive Intvl:
NAT Verbindungsintervall
 
Configuration Profile     RT31P2 Firmware Upgrade   |   WRT54GP2 Firmware Upgrade

Provision Enable: Resync On Reset:
Resync Random Delay: Resync Periodic:
Resync Error Retry Delay: Forced Resync Delay:
Resync From SIP: Resync After Upgrade Attempt:
Resync Trigger 1:
Resync Trigger 2:
Resync Fails On FNF:
Profile Rule:
Profile Rule B:
Profile Rule C:
Profile Rule D:
Log Resync Request Msg:
Log Resync Success Msg:
Log Resync Failure Msg:
Report Rule:
Firmware Upgrade    
Upgrade Enable: Upgrade Error Retry Delay:
Downgrade Rev Limit:
Upgrade Rule:
Log Upgrade Request Msg:
Log Upgrade Success Msg:
Log Upgrade Failure Msg:
General Purpose Parameters    
GPP A:
GPP B:
GPP C:
GPP D:
GPP E:
GPP F:
GPP G:
GPP H:
GPP I:
GPP J:
GPP K:
GPP L:
GPP M:
GPP N:
GPP O:
GPP P:
 
Call Progress Tones    
Dial Tone: (deutsche Telefontöne)
Second Dial Tone:
Outside Dial Tone:
Prompt Tone:
Busy Tone: (Betztzeichen)
Reorder Tone: (nicht erreichbar)
Off Hook Warning Tone:
Ring Back Tone: (Rückrufton)
Confirm Tone:
SIT1 Tone:
SIT2 Tone:
SIT3 Tone:
SIT4 Tone:
MWI Dial Tone: (VoiceMail Freizeichen)
Cfwd Dial Tone: (Umleitung oder Freizeichen)
Holding Tone:
Conference Tone:
Secure Call Indication Tone:
Distinctive Ring Patterns    
Ring1 Cadence: Ring2 Cadence:
Ring3 Cadence: Ring4 Cadence:
Ring5 Cadence: Ring6 Cadence:
Ring7 Cadence: Ring8 Cadence:
Distinctive Call Waiting Tone Patterns    
CWT1 Cadence: (Anklopfen / Intervall) CWT2 Cadence:
CWT3 Cadence: CWT4 Cadence:
CWT5 Cadence: CWT6 Cadence:
CWT7 Cadence: CWT8 Cadence:
Distinctive Ring/CWT Pattern Names    
Ring1 Name: Ring2 Name:
Ring3 Name: Ring4 Name:
Ring5 Name: Ring6 Name:
Ring7 Name: Ring8 Name:
Ring and Call Waiting Tone Spec    
Ring Waveform: Ring Frequency:
Ring Voltage: CWT Frequency:
(Ankopf Frequenz)
Synchronized Ring:
Control Timer Values (sec)    
Hook Flash Timer Min: Hook Flash Timer Max:
Callee On Hook Delay: Reorder Delay:
Call Back Expires: Call Back Retry Intvl:
Call Back Delay: VMWI Refresh Intvl:
Interdigit Long Timer: Interdigit Short Timer:
CPC Delay: CPC Duration:
Vertical Service Activation Codes    
Call Return Code: Blind Transfer Code:
Call Back Act Code: Call Back Deact Code:
Cfwd All Act Code: Cfwd All Deact Code:
Cfwd Busy Act Code: Cfwd Busy Deact Code:
Cfwd No Ans Act Code: Cfwd No Ans Deact Code:
Cfwd Last Act Code: Cfwd Last Deact Code:
Block Last Act Code: Block Last Deact Code:
Accept Last Act Code: Accept Last Deact Code:
CW Act Code: CW Deact Code:
CW Per Call Act Code: CW Per Call Deact Code:
Block CID Act Code: Block CID Deact Code:
Block CID Per Call Act Code: Block CID Per Call Deact Code:
Block ANC Act Code: Block ANC Deact Code:
DND Act Code: DND Deact Code:
CID Act Code: CID Deact Code:
CWCID Act Code: CWCID Deact Code:
Dist Ring Act Code: Dist Ring Deact Code:
Speed Dial Act Code: Secure All Call Act Code:
Secure No Call Act Code: Secure One Call Act Code:
Secure One Call Deact Code: Conference Act Code:
Attn-Xfer Act Code:
Referral Services Codes:
Feature Dial Services Codes:
Outbound Call Codec Selection Codes    
Prefer G711u Code: Force G711u Code:
Prefer G711a Code: Force G711a Code:
Prefer G723 Code: Force G723 Code:
Prefer G726r16 Code: Force G726r16 Code:
Prefer G726r24 Code: Force G726r24 Code:
Prefer G726r32 Code: Force G726r32 Code:
Prefer G726r40 Code: Force G726r40 Code:
Prefer G729a Code: Force G729a Code:
Miscellaneous    
Set Local Date (mm/dd): Set Local Time (HH/mm):
  Daylight Saving Time Rule:
(Automatische deutsche Sommer-/Winterzeit)
Time Zone: FXS Port Impedance:
(Widerstand für deutsche Telefone)
FXS Port Input Gain:
(Mikrofonlautstärke)
FXS Port Output Gain:
(Hörerlautstärke)
DTMF Playback Level: DTMF Playback Length:
Detect ABCD: Playback ABCD:
Caller ID Method:
(je nach Telefon auch Bellcore)
FXS Port Power Limit:
Caller ID FSK Standard:
 
Line Enable:
Streaming Audio Server (SAS)    
SAS Enable: SAS DLG Refresh Intvl:
SAS Inbound RTP Sink:
NAT Settings    
NAT Mapping Enable: NAT Keep Alive Enable:
NAT Keep Alive Msg: NAT Keep Alive Dest:
Network Settings    
SIP TOS/DiffServ Value: Network Jitter Level:
RTP TOS/DiffServ Value:
SIP Settings    
SIP Port: SIP 100REL Enable:
EXT SIP Port: Auth Resync-Reboot:
SIP Debug Option: RTP Log Intvl:
Restrict Source IP:
Call Feature Settings    
Blind Attn-Xfer Enable: MOH Server:
Xfer When Hangup Conf:
Proxy and Registration    
Proxy: Use Outbound Proxy:
Outbound Proxy: Use OB Proxy In Dialog:
Register: Make Call Without Reg:
Register Expires: Ans Call Without Reg:
Use DNS SRV: DNS SRV Auto Prefix:
Proxy Fallback Intvl: Voice Mail Server:
Subscriber Information    
Display Name: User ID:
Password: Use Auth ID:
Auth ID:
Mini Certificate:
SRTP Private Key:
Supplementary Service Subscription    
Call Waiting Serv: Block CID Serv:
Block ANC Serv: Dist Ring Serv:
Cfwd All Serv: Cfwd Busy Serv:
Cfwd No Ans Serv: Cfwd Sel Serv:
Cfwd Last Serv: Block Last Serv:
Accept Last Serv: DND Serv:
CID Serv: CWCID Serv:
Call Return Serv: Call Back Serv:
Three Way Call Serv: Three Way Conf Serv:
Attn Transfer Serv: Unattn Transfer Serv:
MWI Serv: VMWI Serv:
Speed Dial Serv: Secure Call Serv:
Referral Serv: Feature Dial Serv:
Audio Configuration    
Preferred Codec: Silence Supp Enable:
Use Pref Codec Only: Silence Threshold:
G729a Enable: Echo Canc Enable:
G723 Enable: Echo Canc Adapt Enable:
G726-16 Enable: Echo Supp Enable:
G726-24 Enable: FAX CED Detect Enable:
G726-32 Enable: FAX CNG Detect Enable:
G726-40 Enable: FAX Passthru Codec:
FAX Codec Symmetric: FAX Passthru Method:
DTMF Tx Method: FAX Process NSE:
Hook Flash Tx Method: Release Unused Codec:

Dial Plan    
Dial Plan:
InternetCalls Dailplain:
00 (Access Code)
49 (Country Code - Germany)
5201 (Ortsvorwahl ohne führende 0)

Enable IP Dialing:
Dailplain deaktiviert = "no"
Dailplain aktiviert = "yes"


Emergency Number:

FXS Port Polarity Configuration    
Idle Polarity: Caller Conn Polarity:
Callee Conn Polarity:
 
Line Enable:
Streaming Audio Server (SAS)    
SAS Enable: SAS DLG Refresh Intvl:
SAS Inbound RTP Sink:
NAT Settings    
NAT Mapping Enable: NAT Keep Alive Enable:
NAT Keep Alive Msg: NAT Keep Alive Dest:
Network Settings    
SIP TOS/DiffServ Value: Network Jitter Level:
RTP TOS/DiffServ Value:
SIP Settings    
SIP Port: SIP 100REL Enable:
EXT SIP Port: Auth Resync-Reboot:
SIP Debug Option: RTP Log Intvl:
Restrict Source IP:
Call Feature Settings    
Blind Attn-Xfer Enable: MOH Server:
Xfer When Hangup Conf:
Proxy and Registration    
Proxy:



Use Outbound Proxy:
(Bei Verbindungsfehlern aktivieren)
Outbound Proxy: Use OB Proxy In Dialog:
Register: Make Call Without Reg:
Register Expires:


(Registrierungsintervall)
Ans Call Without Reg:
Use DNS SRV: DNS SRV Auto Prefix:
Proxy Fallback Intvl: Voice Mail Server:
Subscriber Information    
Display Name: User ID:
Password: Use Auth ID:
Auth ID:
Mini Certificate:
SRTP Private Key:
Supplementary Service Subscription    
Call Waiting Serv: Block CID Serv:
Block ANC Serv: Dist Ring Serv:
Cfwd All Serv: Cfwd Busy Serv:
Cfwd No Ans Serv: Cfwd Sel Serv:
Cfwd Last Serv: Block Last Serv:
Accept Last Serv: DND Serv:
CID Serv: CWCID Serv:
Call Return Serv: Call Back Serv:
Three Way Call Serv: Three Way Conf Serv:
Attn Transfer Serv: Unattn Transfer Serv:
MWI Serv: VMWI Serv:
Speed Dial Serv: Secure Call Serv:
Referral Serv: Feature Dial Serv:
Audio Configuration    
Preferred Codec: Silence Supp Enable:
Use Pref Codec Only: Silence Threshold:
G729a Enable: Echo Canc Enable:
G723 Enable: Echo Canc Adapt Enable:
G726-16 Enable: Echo Supp Enable:
G726-24 Enable: FAX CED Detect Enable:
G726-32 Enable: FAX CNG Detect Enable:
G726-40 Enable: FAX Passthru Codec:
FAX Codec Symmetric: FAX Passthru Method:
DTMF Tx Method: FAX Process NSE:
Hook Flash Tx Method: Release Unused Codec:
Dial Plan    
Dial Plan:
Enable IP Dialing:

Emergency Number:

FXS Port Polarity Configuration    
Idle Polarity: Caller Conn Polarity:
Callee Conn Polarity:
 
Line Enable:
Streaming Audio Server (SAS)    
SAS Enable: SAS DLG Refresh Intvl:
SAS Inbound RTP Sink:
NAT Settings    
NAT Mapping Enable: NAT Keep Alive Enable:
NAT Keep Alive Msg: NAT Keep Alive Dest:
Network Settings    
SIP TOS/DiffServ Value: Network Jitter Level:
RTP TOS/DiffServ Value:
SIP Settings    
SIP Port: SIP 100REL Enable:
EXT SIP Port: Auth Resync-Reboot:
SIP Debug Option: RTP Log Intvl:
Restrict Source IP:
Call Feature Settings    
Blind Attn-Xfer Enable: MOH Server:
Xfer When Hangup Conf:
Proxy and Registration    
Proxy:



Use Outbound Proxy:
(Bei Verbindungsfehlern aktivieren)
Outbound Proxy: Use OB Proxy In Dialog:
Register: Make Call Without Reg:
Register Expires:


(Registrierungsintervall)
Ans Call Without Reg:
Use DNS SRV: DNS SRV Auto Prefix:
Proxy Fallback Intvl: Voice Mail Server:
Subscriber Information    
Display Name: User ID:
Password: Use Auth ID:
Auth ID:
Mini Certificate:
SRTP Private Key:
Supplementary Service Subscription    
Call Waiting Serv: Block CID Serv:
Block ANC Serv: Dist Ring Serv:
Cfwd All Serv: Cfwd Busy Serv:
Cfwd No Ans Serv: Cfwd Sel Serv:
Cfwd Last Serv: Block Last Serv:
Accept Last Serv: DND Serv:
CID Serv: CWCID Serv:
Call Return Serv: Call Back Serv:
Three Way Call Serv: Three Way Conf Serv:
Attn Transfer Serv: Unattn Transfer Serv:
MWI Serv: VMWI Serv:
Speed Dial Serv: Secure Call Serv:
Referral Serv: Feature Dial Serv:
Audio Configuration    
Preferred Codec: Silence Supp Enable:
Use Pref Codec Only: Silence Threshold:
G729a Enable: Echo Canc Enable:
G723 Enable: Echo Canc Adapt Enable:
G726-16 Enable: Echo Supp Enable:
G726-24 Enable: FAX CED Detect Enable:
G726-32 Enable: FAX CNG Detect Enable:
G726-40 Enable: FAX Passthru Codec:
FAX Codec Symmetric: FAX Passthru Method:
DTMF Tx Method: FAX Process NSE:
Hook Flash Tx Method: Release Unused Codec:
Dial Plan    
Dial Plan:
Enable IP Dialing:

Emergency Number:

FXS Port Polarity Configuration    
Idle Polarity: Caller Conn Polarity:
Callee Conn Polarity:
 
Line Enable:
Streaming Audio Server (SAS)    
SAS Enable: SAS DLG Refresh Intvl:
SAS Inbound RTP Sink:
NAT Settings    
NAT Mapping Enable: NAT Keep Alive Enable:
NAT Keep Alive Msg: NAT Keep Alive Dest:
Network Settings    
SIP TOS/DiffServ Value: Network Jitter Level:
RTP TOS/DiffServ Value:
SIP Settings    
SIP Port: SIP 100REL Enable:
EXT SIP Port: Auth Resync-Reboot:
SIP Debug Option: RTP Log Intvl:
Restrict Source IP:
Call Feature Settings    
Blind Attn-Xfer Enable: MOH Server:
Xfer When Hangup Conf:
Proxy and Registration    
Proxy:



Use Outbound Proxy:
(Bei Verbindungsfehlern aktivieren)
Outbound Proxy: Use OB Proxy In Dialog:
Register: Make Call Without Reg:
Register Expires:


(Registrierungsintervall)
Ans Call Without Reg:
Use DNS SRV: DNS SRV Auto Prefix:
Proxy Fallback Intvl: Voice Mail Server:
Subscriber Information    
Display Name: User ID:
Password: Use Auth ID:
Auth ID:
Mini Certificate:
SRTP Private Key:
Supplementary Service Subscription    
Call Waiting Serv: Block CID Serv:
Block ANC Serv: Dist Ring Serv:
Cfwd All Serv: Cfwd Busy Serv:
Cfwd No Ans Serv: Cfwd Sel Serv:
Cfwd Last Serv: Block Last Serv:
Accept Last Serv: DND Serv:
CID Serv: CWCID Serv:
Call Return Serv: Call Back Serv:
Three Way Call Serv: Three Way Conf Serv:
Attn Transfer Serv: Unattn Transfer Serv:
MWI Serv: VMWI Serv:
Speed Dial Serv: Secure Call Serv:
Referral Serv: Feature Dial Serv:
Audio Configuration    
Preferred Codec: Silence Supp Enable:
Use Pref Codec Only: Silence Threshold:
G729a Enable: Echo Canc Enable:
G723 Enable: Echo Canc Adapt Enable:
G726-16 Enable: Echo Supp Enable:
G726-24 Enable: FAX CED Detect Enable:
G726-32 Enable: FAX CNG Detect Enable:
G726-40 Enable: FAX Passthru Codec:
FAX Codec Symmetric: FAX Passthru Method:
DTMF Tx Method: FAX Process NSE:
Hook Flash Tx Method: Release Unused Codec:
Dial Plan    
Dial Plan:
Enable IP Dialing:

Emergency Number:

FXS Port Polarity Configuration    
Idle Polarity: Caller Conn Polarity:
Callee Conn Polarity:
 
Call Forward Settings    
Cfwd All Dest: Cfwd Busy Dest:
Cfwd No Ans Dest: Cfwd No Ans Delay:
Selective Call Forward Settings    
Cfwd Sel1 Caller: Cfwd Sel1 Dest:
Cfwd Sel2 Caller: Cfwd Sel2 Dest:
Cfwd Sel3 Caller: Cfwd Sel3 Dest:
Cfwd Sel4 Caller: Cfwd Sel4 Dest:
Cfwd Sel5 Caller: Cfwd Sel5 Dest:
Cfwd Sel6 Caller: Cfwd Sel6 Dest:
Cfwd Sel7 Caller: Cfwd Sel7 Dest:
Cfwd Sel8 Caller: Cfwd Sel8 Dest:
Cfwd Last Caller: Cfwd Last Dest:
Block Last Caller: Accept Last Caller:
Speed Dial Settings    
Speed Dial 2: Speed Dial 3:
Speed Dial 4: Speed Dial 5:
Speed Dial 6: Speed Dial 7:
Speed Dial 8: Speed Dial 9:
Supplementary Service Settings    
CW Setting: Block CID Setting:
Block ANC Setting: DND Setting:
CID Setting: CWCID Setting:
Dist Ring Setting: Secure Call Setting:
Message Waiting:
Distinctive Ring Settings    
Ring1 Caller: Ring2 Caller:
Ring3 Caller: Ring4 Caller:
Ring5 Caller: Ring6 Caller:
Ring7 Caller: Ring8 Caller:
Ring Settings    
Default Ring: Default CWT:
Hold Reminder Ring: Call Back Ring:
Cfwd Ring Splash Len: Cblk Ring Splash Len:
VMWI Ring Splash Len:
VMWI Ring Policy:
Ring On No New VM:
 
Call Forward Settings    
Cfwd All Dest: Cfwd Busy Dest:
Cfwd No Ans Dest: Cfwd No Ans Delay:
Selective Call Forward Settings    
Cfwd Sel1 Caller: Cfwd Sel1 Dest:
Cfwd Sel2 Caller: Cfwd Sel2 Dest:
Cfwd Sel3 Caller: Cfwd Sel3 Dest:
Cfwd Sel4 Caller: Cfwd Sel4 Dest:
Cfwd Sel5 Caller: Cfwd Sel5 Dest:
Cfwd Sel6 Caller: Cfwd Sel6 Dest:
Cfwd Sel7 Caller: Cfwd Sel7 Dest:
Cfwd Sel8 Caller: Cfwd Sel8 Dest:
Cfwd Last Caller: Cfwd Last Dest:
Block Last Caller: Accept Last Caller:
Speed Dial Settings    
Speed Dial 2: Speed Dial 3:
Speed Dial 4: Speed Dial 5:
Speed Dial 6: Speed Dial 7:
Speed Dial 8: Speed Dial 9:
Supplementary Service Settings    
CW Setting: Block CID Setting:
Block ANC Setting: DND Setting:
CID Setting: CWCID Setting:
Dist Ring Setting: Secure Call Setting:
Message Waiting:
Distinctive Ring Settings    
Ring1 Caller: Ring2 Caller:
Ring3 Caller: Ring4 Caller:
Ring5 Caller: Ring6 Caller:
Ring7 Caller: Ring8 Caller:
Ring Settings    
Default Ring: Default CWT:
Hold Reminder Ring: Call Back Ring:
Cfwd Ring Splash Len: Cblk Ring Splash Len:
VMWI Ring Splash Len:
VMWI Ring Policy:
Ring On No New VM: